Graffiti Resistent Systems 

Wattyl has a wide range of Architectural Coating products that may be used to provide resistance to graffiti. This guide is designed to assist in the selection of the correct coating system for your application by providing Wattyl’s most common coating systems for typical substrates and exposure environments.

System selection is a function of: exposure environment, expected life, substrate material, substrate condition, previous coating (if present), surface preparation method, application method, application conditions and requirements, structure design.

Correct surface preparation is critical to the longevity of any coating system. For details of surface preparation methods refer to the surface preparation sections of the Wattyl Architectural Coatings Manual along with the appropriate New Zealand Standards. For further assistance with system selection for a specific project please contact your local Sales Representative or contact Wattyl on 0800 735 551.

If you can not find a system that meets your needs, or you wish for a tailored specification, please click on the email link Project Services

Note: due to the wide range of applied materials that can be used for defacing of surfaces, complete removal of the graffiti medium cannot be guaranteed in all cases.

Please refer to the Technical "Did You Know" Tips sheet on removal of graffiti form Estathane 400 Graffiti Resistant Urethane  

Exterior Clay Bricks, Cement Bricks, Insitu, Precast Concrete Masonry, Cement Sheeting

Exterior Tilt up Concrete