15 years protection
Home / Sheen Levels / Warranty / Solagard TV Advert
Now you can keep that fresh ‘just painted’ look for longer. Because Solagard’s Total Protection Technology protects your paintwork against flaking, peeling and blistering – we provide a warranty for up to 15 years.
Wattyl's industry-leading Solagard range now incorporates Total Protection Technology, the culmination of 30 years' research and development. The new and improved formulation combines UV block-out, mould and mildew inhibitors and high-performance polymers along with the security of an extended 15-year warranty against flaking, peeling or blistering. Wattyl Solagard can be applied at temperatures as low as 5°C.
*Solagard Flake, Peel or Blister Warranty
“Wattyl warrants that if Solagard in a colour selected from the Solagard colour card, is correctly tinted and mixed at the time of purchase is applied correctly on sound, properly prepared surfaces as per label instruction, it will not flake, peel or blister for 15 or 10 years depending on number of coats and the surface type as shown in the table below. If this paint fails to perform as specified above, Wattyl will provide, free of charge, sufficient paint to recoat the affected areas. Paint failure caused by any breakdown of a previous coating is not covered by this warranty”. For full details on the warranty telephone Wattyl on 0800 735 551. Terms, conditions and some exclusions apply to this warranty.
|
SURFACE TYPE |
15 year warranty finish coats |
10 year warranty finish coats |
|
Previously painted surfaces and new ColorSteel® |
2 coats of Solagard |
2 coats of Solagard |
|
Bare Timber# |
3 coats of Solagard |
2 coats of Solagard |
|
Bare Cement Render, Brick, Fibre Cement, Masonry |
3 coats of Solagard |
2 coats of Solagard |
|
Zincalume® |
3 coats of Solagard |
2 coats of Solagard |
|
Galvanised iron sheet |
3 coats of Solagard |
2 coats of Solagard |
# When using Solagard Roof on these substrates refer to label for the correct primer.
Not suitable for walk on surfaces.